Belkin is known for manufacturing and retailing technically advanced electronic products specializing in connectivity devices. It aims to make people realize the power of technology and make their lives more streamlined and fulfilling. Therefore, it provides the users with an extensive range of products, including routers, extenders, network switches, etc. All the products offered by Belkin are known for their simplicity and ease of use.
Belkin range extenders are the standard equipment to enhance the wireless coverage area between your desired location and wireless router. Thus, if you have become tired of all those dead zones in your house or offices, or it irritates you to carry your wireless router wherever you go in the building, Belkin range extender can prove to be a blessing in your life. However, no doubt, the Belkin range extender will give you the best networking experience that you didn’t even know existed, but it can be quite hectic to install Belkin.setup.
One of the most common issues that users face while performing Belkin setup is they can’t see the default name of the network. Therefore, in this write-up, we’ll discuss how to fix this issue and set up your Belkin range extender in a breeze.
Features and Advantages of Belkin Wi-Fi Range Extender
In this section, we will discuss the outstanding features of the Belkin range extender that helps you experience a smooth internet network in every corner of your home:-
Eliminates Wi-Fi Dead zones
With the help of the Belkin range extender, you can increase your home internet network’s wireless connection up to additional 5,000 square feet. Moreover, it’s incredibly simple to install and compatible with any Wi-Fi router. So, it prevents you from reconfiguring anything on your home wireless network. Hence, it is one of the fastest and easiest ways to expand your home network.
It features a compact design that enables replacement. The best thing about its design is, in most cases, it doesn’t block the second socket in most wall outlets.
Enhances Smartphone connection
Not only computers, but it is also compatible with mobile devices, including laptops, smartphones, tablets, and others. No room is off the limits with the Belkin Wi-Fi range extender. Moreover, you do not have to use your expensive cellular bandwidth.
Easy and simple installation
Another best advantage of using the Belkin extender is its setup process is easy and straightforward. All you should do is plug the extender into the power outlet and find your wireless home network, and then you are all set to enjoy the expanded network within a few minutes.
What is Belkin.setup, and what to do when it doesn’t show up?
Belkin.setup is a network name that you can use to set up your Belkin extender when you install it. When the extender is plugged into the power outlet, it automatically starts broadcasting a signal, but you still have to configure it with your Wi-Fi network.
Therefore, as soon as you plug the Belkin range extender into a power outlet, you should see Belkin Setup on your available networks list. Refresh the network list if you don’t see the network name in it. Moreover, you can also turn the Wi-Fi on that is connected to the device you are going to use to install the Belkin extender. If nothing works, you can also reset and set up your extender by following the instructions given in the next section.
How to setup the Belkin range extender manually?
Are you having trouble setting up your Belkin range extender? Here we will give the step-by-step process through which you can easily set up the extender and resolve the “default name don’t show up” issue. So, follow the guidelines provided below:-
Note: make sure that your Wi-Fi extender is power on before beginning with the below steps.
- First, you will have to reset the extender by pressing and holding the reset key given at the bottom. Hold the key for about 30 seconds, and then restart your Belkin range extender and computer.
- After this, get an internet cable (Ethernet cable) and connect your computer with an extender.
- Now, go to the internet browser on your computer and enter “Belkin.range” in the address bar and connect with the Belkin extender console.
- Here, you should connect your existing router network using its password and proceed with the next steps.
- Now, you will see the default network name- Belkin.setup in the available networks list. You can change the name according to your choice.
- Now, set up a password and then save the settings.
- After this, remember to reboot your Belkin extender.
Hence by using all the above-mentioned steps, you have successfully connected your Belkin range extender and remove the Belkin.setup related issue.
After resolving the Belkin.setup issue and setting up your Belkin range extender, you are ready to enjoy the expanded and smooth Wi-Fi network connection. Now you can say goodbye to all those dark and dead zones in your house and use the internet freely in every corner.